Thermokon LCF02 Touch 3AO2DO, Datasheet

Page: 9 / 15

Issue Date: 22.01.2020 Page 9 / 15
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Deutschland · tel: 02778/6960-0 · fax: -400 · www.thermokon.de · email@thermokon.de
LCF02-Touch_3AO2DO_Datasheet_en.docx © 2020
266 0x010A
Read-write
External temperature (limiter) sensor high limit
(338=3, for limiter)
-200..+1000 = -20,0…+100,0 °C
0.1 °C/°F 40°C
267 0x010B Read-write External temperature (limiter) sensor low limit
(338=3, for limiter)
-200..+1000 = -20,0…+100,0 °C
0.1 °C/°F 0°C
268 0x010C Read-write Power failure
0=keep off after power-on-reset
1=return to last stFate after power failure
2=switch on after power-on-reset
1
269 0x010D Read-write Key-lock
0x00=unlocked
0x01=lock on/off
0x02=lock mode
0x04=lock clock
0x08=lock fan speed
0x10=lock temp setting
0x1F=lock all keystrokes
Once a locked key is pressed the LOCK symbol shall be
displayed and blink twice.
0
270 0x010E
Read-write
Display Settings
0b00000001= show Setpoint (if no setpoint is shown the
setpoint keys are locked = 0x010D = 0x10=lock temp
setting)
0b00000010= show Room temperature
0b00000100 = show valve symbol
0b00001000 = show PI-Loop percentage
0bxxx10000 = show Room temperature from Register
0x205
(if only room temp or setpoint is shown, then in big
numbers)
15
Set point settings
Address Access Description Resolution / Unit Default
271 0x010F Read-write Default Setpoint after Power On Reset
0..500 = 0…50,0 °C
0.1 °C/°F 210
272 0x0110
Read-write
Setpoint temperature lower limit
0..500 = 0..50,0 °C
0.1 °C/°F 160
273 0x0111
Read-write
Setpoint temperature upper limit
0..500 = 0..50,0 °C
0.1 °C/°F 300
274 0x0112 Read-write Setpoint increment/decrement value
1..100 = 0,1…10,0 °C
0.1 °C/°F 5
275 0x0113 Read-write ECO mode temperature setpoint cooling
250..450 = +25,0..+45,0 °C
0.1 °C/°F 300
276 0x0114 Read-write ECO mode temperature setpoint heating
120..240 = +12,0..+24,0 °C
0.1 °C/°F 190