ThermoFisher Scientific Wellwash 4, Service Manual

Page: 75 / 156

Chapter 8: Troubleshooting
Thermo Scientific Wellwash
®
4 Mk 2 User Manual Rev.2.3, Cat. no. 1507340 51
9 Wash arm assembly not
moving as it should
Contact authorized service.
10 Plate carrier not moving
as it should
Obstacle on the plate
carrier slideway Keep the slideway clean.
Program card not inserted
all the way Push the program card all
the way into the slot.
Program card is dirty Clean the program card.
11 Wash cycle does not
correspond to the
program card
Program card is damaged Replace the program card.
Contact your local Thermo
Fisher Scientific
representative.
12 Instrument not
functioning as it should
Press the RESET button. If
that doesn't help, switch the
instrument OFF and ON
again. If the problem
persists, contact authorized
service.
DO NOT use the instrument
if it appears that it does not
function properly.
If you were able to correct the error without having to turn off the instrument,
you may continue instrument operation by pressing
start
.