ThermoFisher Scientific Wellwash 4, Service Manual

Page: 38 / 156

Chapter 5: Installation
Thermo Scientific Wellwash
®
4 Mk 2 User Manual Rev.2.3, Cat. no. 1507340 14
Fig. 4.1 shows the pump and washer units in their entirety.
Lift out the washer and pump units, removing the shaped packing pieces from
around the washer, and place them on a flat level surface.
To lift the instrument, put your fingers under the bottom on both sides and lift it
with your back straight. The net weight of the instrument is 10 kg
(22 lbs.).
Caution: When unpacking the instrument, it is recommended that two people lift
the instrument together, taking proper precautions to avoid injury.
Retain the original packaging and packing material for future transportation. The
packaging is designed to assure safe transport and minimize transit damage.
Use of alternative packaging materials may invalidate the warranty. Also, retain
all instrument-related documentation provided by the manufacturer for future
use.
Note: Before use remember to remove the transit screws at the bottom of the
instrument and save them in the adjoining screw holes (marked with the
text "Transit screw storage"). Remove and save the pinch valve holder
until needed for future transportation of the instrument.
5.2.2 Checking delivery for completeness
Check the enclosed packing list against order. In case of any deviations, contact
your local Thermo Fisher Scientific representative or Thermo Fisher Scientific
Oy.
The instrument is supplied with both 8- and 12-way wash heads, four program
cards, the user manual, the mains supply cable and an accessory pack. The
content of the accessory pack is shown in Fig. 5.1 and Fig. 5.2. Store the
accessories in their bags until you need them.
1. Combiplate
2. 4 spare fuses (see Section 7.1.10 Fuse replacement)
3. 2 Allen keys (see Section 5.3 Installation procedure, step 1)
4. 2 spanners (see Section 5.3.2 Wash head height)
5. De-clogging tool (see Section 7.1.9 Unclogging tips)
6. 6 spare O rings for the bottle caps
7. 4 spare O rings (see Section 5.3 Installation procedure, step 5)
Fig. 5.1 Accessories included with the instrument.
1
3
4
7
6
5
2