产品中有害物质的名称及含量
China EEP Hazardous Substances Information
电机组件
Electromech
anical
Assemblies
X
O
O
O
O
O
本表格依据
SJ/T11364
的规定编制
This table is compiled according to SJ/T 11364
standard.
O:
表示该有害物质在该部件所有均质材料中的含量均在
GB/T26572
规定的限量要求以下
.
Indicates that the concentration of the hazardous substance in all homogeneous
materials for the part is below the relevant threshold of the GB/T 26572 standard.
X:
表示该有害物质至少在该部件的某一均质材料中的含量超出
GB/T26572
规定的限量要
.
Indicates that the concentration of the hazardous substance in at least one homogenous
material of the part is above the relevant threshold of the GB/T 26572 standard.
Chemical safety
WARNING!
GENERAL CHEMICAL HANDLING. To minimize hazards,
ensure laboratory personnel read and practice the general safety guidelines for
chemical usage, storage, and waste provided below. Consult the relevant SDS
for specific precautions and instructions:
·
Read and understand the Safety Data Sheets (SDSs) provided by the
chemical manufacturer before you store, handle, or work with any chemicals
or hazardous materials. To obtain SDSs, see the “Documentation and
Support” section in this document.
·
Minimize contact with chemicals. Wear appropriate personal protective
equipment when handling chemicals (for example, safety glasses, gloves, or
protective clothing).
·
Minimize the inhalation of chemicals. Do not leave chemical containers open.
Use only with adequate ventilation (for example, fume hood).
·
Check regularly for chemical leaks or spills. If a leak or spill occurs, follow
the manufacturer's cleanup procedures as recommended in the SDS.
·
Handle chemical wastes in a fume hood.
·
Ensure use of primary and secondary waste containers. (A primary waste
container holds the immediate waste. A secondary container contains spills
or leaks from the primary container. Both containers must be compatible
with the waste material and meet federal, state, and local requirements for
container storage.)
·
After emptying a waste container, seal it with the cap provided.
·
Characterize (by analysis if necessary) the waste generated by the particular
applications, reagents, and substrates used in your laboratory.
·
Ensure that the waste is stored, transferred, transported, and disposed of
according to all local, state/provincial, and/or national regulations.
·
IMPORTANT! Radioactive or biohazardous materials may require special
handling, and disposal limitations may apply.
Appendix B
Safety
Chemical safety
B
iBright
™
Imaging Systems User Guide
43
