1.
Touch Edit channels.
2.
Touch a dye button.
3.
Select a dye from the dye table.
User-created dyes are available as channels.
4.
(Optional) Touch to toggle the dye overlay on the image on or off .
5.
Touch Back to return to previous screen.
6.
Touch Done.
After the initial Smart Exposure, you have the option to change exposure times for
individual dye channels.
1.
Touch Smart Exposure. .
The imager will acquire a series of short exposures for each dye type selected. It
will then render preview images and a recommended exposure time for each
channel. These are not real images.
2.
Touch Edit channels.
3.
Touch a dye button.
4.
To adjust or set a manual exposure time, select a method:
• Touch + or – within dial.
• Finger swipe in the segmented dial.
• Touch the dial center box to select a preset exposure time or touch Custom to
input a user-specified time.
5.
Touch Enter.
The image preview will update in real-time.
6.
Touch Capture to acquire image with the indicated exposure time.
Captured image appears on screen and automatically saves to the gallery.
7.
If an acceptable image, touch Export, Gallery or Analyze. If an unacceptable
image, touch More options
4
Image adjust to optimize image or touch Trash to
remove image, then return to steps 3-5 to adjust exposure conditions.
Edit a dye in the
Fluorescent Blots
mode
Edit dye channel
exposure time
Operate the iBright
™
imager
Fluorescent Blots (FL1000 model only)
14
iBright
™
Imaging Systems User Guide
