D
Setting Up Sample Introduction Techniques
Setting Up Injections Using the Autosampler
140
TSQ Altis, Quantis, and Fortis Hardware Manual
Thermo Scientific
2. Use a Rheodyne fitting to connect one end of the Teflon tubing to Port 4. Place the other
end in a waste container (not shown).
3. Connect red PEEK tubing to Port 6 and the other end to the API source.
Figure 73.
Divert/Inject valve plumbed as a divert valve
No.
Description
1.
Port 6 tubing connected to the API Source
2.
Port 5 tubing connected from the LC Pumps
3.
Port 4 Teflon tubing connected to Waste
3
3
2
1
5
4
6
2
1
