Thermo Scientific Thermo Scientific SL16, Instruction Manual

Page: 47 / 62

7
Troubleshooting
Troubleshooting by user
Thermo Scientific SL 16 / 16R 7-5
E-29 The centrifuge cannot be operated.
The run will not be started.
Is the rotor properly installed?
Is it easy to turn the rotor when the lid is open?
Does the rotor rub against the device?
Restart the centrifuge.
If an error message appears again, inform Customer Service.
E-30 The centrifuge cannot be operated.
The run does not start or the centrifuge
runs down without being braked.
Restart the centrifuge.
If an error message appears again, inform Customer Service.
E-33 The centrifuge cannot be operated.
The run does not start or the centrifuge
runs down without being braked.
Overpressure in the refrigeration unit.
Clean the air inlet for the condenser.
Restart the centrifuge.
If an error message appears again, inform Customer Service.
E-34-E-36 The centrifuge cannot be operated.
The run does not start or the centrifuge
runs down without being braked.
Error during the self-test of the centrifuge program and the
electronics.
Restart the centrifuge.
If an error message appears again, inform Customer Service.
E-40 The centrifuge cannot be operated.
The run does not start or the centrifuge
runs down without being braked.
The centrifuge accelerates too slowly.
Is the rotor properly installed?
Check wether you selected the right bucket.
Is it easy to turn the rotor when the lid is open?
Does the rotor rub against the device?
Restart the centrifuge.
If an error message appears again, inform Customer Service.
E-41-E-74 The centrifuge cannot be operated.
The run does not start or the centrifuge
runs down without being braked.
Error during the self-test of the centrifuge program and the
electronics.
Restart the centrifuge.
If an error message appears again, inform Customer Service.
Failure message Problem with centrifuge Possible causes and cures