Thermo Scientific Thermo Scientific SL16, Instruction Manual

Page: 30 / 62

4
Operation
Saving programs
4-6 SL 16 / 16R Thermo Scientific
Prewarming or precooling the centrifuge
For setting the pretemp value for the centrifuge proceed as follows:
1. Press the key below the TEMPERATURE display in order to open the temperature selection
menu.
The display shows the message "Set PreTemp
"
2. Enter the desired value by pressing the key repeatedly, until the desired value shows.
3. Close the centrifuge lid.
The display shows the current temperature inside the rotor chamber.
4. Press the "START" key .
The rotor chamber is cooled down or heated up to the preset temperature.
5. Press the "STOP" key .
The display shows the current temperature inside the rotor chamber.
Bucket selection
Bucket selection is only possible for swing-out rotors. The bucket code corresponds to the last four
digits of the bucket catalog number.
1. Press the "BUCKET" key.
The display shows the following message:
2. Press the BUCKET key repeatedly until the bucket being used is displayed.
Saving programs
1. Enter the program parameters.
2. Press any of the program store keys for 5 seconds.