80
Thermo Fisher Scientific
User Guide STP420D/STP420ES
Note!
Changing protocols: The minimum user level required to change protocols
is ‘Supervisor’. Routine users cannot change protocols. For these users, the
‘Edit’ button becomes a ‘View’ button only, and only viewing the protocol is
possible.
1. On the Standby screen, choose the appropriate chamber by selecting
either
Rotation
or
Biopsy
.
If no protocol is currently running, a list of predefined protocols
appears.
If a protocol is already running in the selected chamber, select
List
to see a list of existing protocols.
Depending on the situation, different function buttons appear at
the bottom of the screen.
2. Choose a protocol from the list and select
Edit
in the lower part of
the screen, to see a list of its protocol steps and options.
The area above the list shows the protocol name, and the predefined
fixed end time if the ‘Fixed end time’ box is checked.
3. To
edit a value
, touch its text box and proceed as follows:
• Reagent: Select the desired reagent from the available list and
click
OK
to save the change. Pressing
OK
will save the log, or
enter additional values.
• Duration or Temperature: Select values from the predefined
ranges using the virtual keyboard, touch
OK
to save the change.
Pressing
OK
will save the log, or enter additional values.
3-7 Editing and
Creating Protocols
3-7-1 Editing a protocol
routine operations
Editing and Creating Protocols
Figure 36.
Detail of protocol screen with editing options.
[1] Waiting step
[2] Pressure/Vacuum
Step
1
20
2
3
4
Reagent
Duration
(min)
Temperatur
F
P
/
V
Drain
time
(sec)
Edit
program
Name:
Standard
05
:
00
Fixed
end
time
Edit
step
20
20
20
20
Formalin
1
10
-
-
Formalin
2
10
-
-
Alkohol
70%
10
-
-
Alkohol
80%
10
-
-
[1]
[2]
