Thermo Scientific STP420D Instruction Manual Download Page 107

Page: 107 / 126

107

Thermo Fisher Scientific

User Guide STP420D/STP420ES

Cleaning and Maintenance

Routine Maintenance

5-5 routine

Maintenance

5-6 Service Contract

Thermo Fisher Scientific strongly recommends that only trained and

certified service technicians carry out maintenance on your STP420.

Certified service technicians are trained by Thermo Fisher Scientific and

are equipped with the necessary tools and the latest software updates.

To make sure the instrument continues to process safely, you are

advised to have a routine maintenance carried out by a trained service

technician

twice a year

Thermo Fisher Scientific, or a local service provider authorized by

Thermo Fisher Scientific, offers a service contract which guarantees that

the routine maintenance takes place on time, and that your instrument

is always in perfect condition. A notification will appear on the screen

during these intervals. ThermoFisher service should be called as soon as

possible. The prompt can be closed and the unit used normally until the

maintenance is performed.

For more information, contact your nearest Thermo Fisher Scientific

sales and service office.

You are strongly advised not to carry out repairs yourself. To do so

would render all the warranties and guarantees null and void. Repair

work must only be carried out by an authorized service technician.

Parts must only be checked or replaced by Thermo Fisher Scientific or

its authorized representatives.

Summary of Contents for STP420D































































































































Search results

Summary of Contents for STP420D

Reviews:

Related manuals for STP420D

Brands by name

Popular brands

Thermo Scientific STP420D, Instruction Manual

Search results

Summary of Contents for STP420D

Reviews:

Related manuals for STP420D

Brands by name

Popular brands