A83910100 Issue 1
19
Fitting the Thermal Transfer Ribbon Roll
In order to fit the Thermal Transfer Ribbon, carry out the following instructions:
Slide open the side door to access
the spools inside the instrument.
Fit the Supply Spool onto the instrument using the
clear lead attached on the roll.
Feed the ribbon through the
instrument ensuring that the tape
is fitted in the correct position over
every spool. Fix the ribbon to the
collection spool using tape.
Note
When you fit the tape do not forget to fit the
tape over the Tape Guide Pin near the Print
Head.
Remove the clear leader from the roll
prior to affixing the ribbon to the spool. Set
the leader aside for reloading tape mid-roll if
necessary
.
