Thermo Scientific Russell RL060P, User Manual

Page: 7 / 27

Thermo Scientific Russell RL060P pH Meter User Guide
Inserting & Removing the Rubber Armor
Some .models .also .include .a .rubber .armor
1 . . .To .remove .the .meter .from .the .rubber .armor, .push .
the .bottom .edges .of .meter .out .until .it .is .completely .
separated .from .the .armor . .Ensure .that .the .cables .
on .the .pH .electrode .or .the .temperature .probe .are .
not .connected .
2 . . .To .insert .the .meter .into .the .rubber .armor, .slide .in .
from .the .top .of .meter .before .pushing .the .bottom .
edges .down .and .set .it .into .position . .Lift .up .the .
stand .at .the .back .of .the .meter .for .bench .top .
applications .if .necessary .
Inserting New Batteries
The .battery .compartment .is .found .at .the .back .of .
instrument . .To .open .the .battery .compartment, .push .
in .the .direction .of .the .arrow .and .lift .up .the .cover . .
Note .the .polarity .of .the .battery .before .inserting .it .
into .position . .After .replacement, .place .the .cover .
back .and .press .down .until .it .locks .tight . .