Thermo Scientific Russell RL060P, User Manual

Page: 9 / 27

Thermo Scientific Russell RL060P pH Meter User Guide
Switching the Meter On
1 . . .Press . .to .power .up .your .meter . .All .LCD .
segments .display .momentarily .as .the .meter .
performs .a .self-diagnostic .test . .
2 . . .Press . .to .choose .your .desired .mode .of .
measurement . .The .corresponding .annunciator .
displays .in .the .LCD . .
. .In .temperature .mode, .the .measured .reading .
can .be .25 .0 .˚C .(factory .default) . .The .last .
calibrated .temperature .value .will .appear .if .there .
is .no .temperature .probe .connected, .or .current .
measured .value .will .appear .if .a .temperature .
probe .is .connected .
3 . . .The .LCD .displays .“
Or
” .if .the .meter .reading .
exceeds .the .maximum .or .“ Ur ” .if .under .minimum .
measurement .range . .Refer .to .
Chapter VII,
Specification . .