32
Operating Instructions Biological Safety Cabinet | MSC-Advantage
5
0
1
2
8
8
5
6
_
0
4
.2
0
1
1
6
Handling and control
6.1.4
Failure messages
Failure messages are shown on the display as text/number combinations with
the codes ER 3 to ER 7. If one of these codes appears on the display, contact
Technical Service immediately.
6.2
Device start-up
1.
Fig. 14:
Switch the device on, keep the
ON
key [2] depressed until:
•
the blowers start (audible blower operation),
•
the status indicators (LEDs) [9] - [12] illuminate.
NOTE – Switch-on!
A time delay of several seconds may occur
between key actuation and device response.
2. Move the front window to the work position. The correct position is reached
when the green status indicator
F
RONT WINDOW IS IN WORK POSITION
[12] is illu-
minated.
The side guide rails have markings that define the lower edge of the front
window; these markings can be used as an additional orientation aid.
3. Wait until the green status indicator
A
IRFLOW IS STEADY
[10] is illuminated.
4. The device is ready for operation.
Fig. 14
Display upon start-up
