Thermo Scientific MIRAN 205B Series, Instruction Manual, Page: 75 / 214

Chapter 7 Configuration and Setup
7-21
If
3
is pressed to select the locations reported, press
1
to choose “All Locations” or
2
to
choose “Only Logged” locations.
If
4
is pressed to select if duplicates are to be reported, press
1
to choose “Duplicates” or
2
to choose “No Duplicates.”
ANALYSIS SETUP PAGE 4
This menu, shown below, differs from the three other Analysis Setup Menus in that it is
used to set up a specific application. It is accessed by pressing the down arrow key from
Analysis Setup Page 3 menu or the up arrow key from Analysis Setup Page 1 menu.
┌────────────────────────────────────────┐
│╒════════ SUMMARY ════════╕ ANALYSIS SETUP │
││ │ 1=Choose applic │
││ │ ───── │
││ Applic: SF6 │ 2=User Settings │
││ │ 3=Applic view │
││ │ and edit │
││ │ │
│└───────────────────────┘ =More │
└────────────────────────────────────────┘
Analysis Setup Menu Page 4
Choose Application
If the application shown on the left side of the display is not the application that is to be
set up, press
1
(Choose applic). Refer to changing applications at the beginning of this
chapter for instructions on how to choose an application.