Thermo Scientific MIRAN 205B Series, Instruction Manual, Page: 107 / 214

Chapter 9 Report/Data
9-5
MEMORY CLEAR
To clear memory, press
4
(Memory clear) from the Report/Data Menu. The Memory
Menu is displayed (see Memory Menu, below). The current status continues to be shown
on the left and the menu of selections on the right. Press
1
to clear logged data and sites.
Press
2
to clear all data. This also removes all locations and replaces the report format
with the default report format. The warning message "Clearing will erase stored data" is
displayed. Press
ESC
to cancel request or
ENTER
to continue. The instrument responds:
"Please wait while clearing memory." When finished, the display responds "CLEARED."
┌────────────────────────────────────────┐
│╒════════ SUMMARY ════════╕ MEMORY MENU │
││ Site: <all> │ 1=Clear logged │
││ │ sites & data │
││ Locations: --- │ │
││ │ 2=Clear all: │
││ │ -logged data │
││ Memory: 94% free │ -locations │
│└───────────────────────┘ -report defin │
└────────────────────────────────────────┘
Memory Menu
Caution
: Press
2
only if the report definition or location list are being changed.
HYPERTERMINAL
To transfer data between the analyzer and a PC, the MIRAN SapphIRe is shipped with
the ThermoConnect program. Although any terminal program that works under the PC’s
operating system may be used to communicate with the analyzer, Hyperterminal is a
widely available program that ships with Windows 95/98/ME, and Windows NT/2000.
Appendix E describes the use of this program.