Thermo Scientific MIRAN 205B Series, Instruction Manual, Page: 15 / 214

3-1
Chapter 3
INSTRUMENT PREPARATION
UNPACKING
Remove the instrument from its shipping carton and/or transportation case and check it
for visible damage. If the instrument has been damaged, notify the carrier immediately
and request an inspection report. Obtain a signed copy of the report from the carrier.
Check the contents of the shipping package against Table 3-1; there should be one of
each item. Immediately report any shortages.
Table 3-1. Packing List
Item Description
1
SapphIRe Ambient Air Analyzer
2 Charger/Power Supply
3 Power Cable*
4 Battery Pack (shipped and installed in the analyzer battery compartment)
5 Chassis Interface Cable*
6 Battery Pack Interface Cable*
7 Shoulder Strap
8 Air Sampling Assembly
10 Particulate Filter
11 Zero Gas Filter
12 Printer Cable*
13 Serial Communication Cable*
14 Battery Door Key
15 Pathlength Change Tool
16 Unit Specific Application Setup Disk
17 Thermo Connect CD
*For identification of cables, see Figure 3-1
Note: If the instrument is returned for any reason, use the original packing. Package all
components in the same manner as they were when shipped from the factory.