Thermo Scientific MIE ADR-1500, Instruction Manual

Page: 45 / 154

Guidelines and Instrument Layout
Thermo Fisher Scientific MIE ADR-1500 Instruction Manual 2-19
The computer requirements to install and run the software provided with
the ADR-1500 (pDR Port) is the following:
●
IBM-PC compatible
●
Pentium I or higher processor
●
Minimum operating system: Windows 95 and later
●
32 MB of RAM
●
10 MB hard disk drive
●
CD-ROM
●
VGA or higher resolution monitor
Thermo Fisher Scientific custom hardware and software provided with
ADR-1500 as standard accessories:
●
USB communications cable
●
Software CD (pDR Port)
To install the Thermo Scientific provided software (pDR Port) in the
computer, proceed as follows:
●
Insert the CD labeled pDR Port into the computer
●
The install program should start automatically
●
The computer displayed install shield then serves to guide the rest of
the installation.
●
Please be sure to accept the Silicon Laboratories USB Driver
installation.
To effect the communication between the ADR-1500 (via the pDR Port
software installed in the computer) and the PC, proceed as follows:
Equipment Damage It is recommended to turn the instrument and
computer OFF before making a connection. ▲
●
Connect the ADR-1500 to one of the computer’s USB ports using the
USB communication cable
●
Key ON the ADR-1500; hold ON/OFF for 4 seconds
●
From your computer Start menu, or your computer desktop, open the
pDR Port software program. A multi-tabbed notebook display should
Communications
with Computer
Software
Installation
Procedure
Communication
between ADR-1500
and Computer