Thermo Scientific MIE ADR-1500, Instruction Manual

Page: 153 / 154

Serial Commands
Thermo Fisher Scientific MIE ADR-1500 Instruction Manual B-3
DISPLAYAVG [ seconds ]
Returns, or programs, the time period in seconds over which the LCD
displayed value is averaged.
FLOWRATE [ flow rate ]
Returns, or programs, the flow rate [LPM] that is to be maintained. This
cannot be changed while logging.
Flow rate = {1.00, 1.01, 1.02, …, 3.50} [in LPM]
GAIN [ gain number ]
A debug facility which returns or programs the front end gain of the
instrument. If you set it, the gain no longer adjusts automatically. To re-
establish auto-gain, use “GAIN 200” or “GAIN A”
Gain number = {0, 1, 2, 3, 4, 5, A} for {1X, 4X, 16X, 64X, 256X, 1024X
and AUTOMATIC}
INLET [ integer ]
Returns, or programs, the inlet selection from the choices integer = {0, 1, 2}
0 = TOTAL
1 = CYCLONE RED
2 = CYCLONE BLUE
KEY [ name of key ] [ long ]
Simulate a key press.
Name of key = {“ESC”, “UP”, “DOWN”, “ENTER” or “ONOFF”}
Long = {“LONG”, “”} LONG is typed only if you wish this to be a long
push.
LOGPERIOD [ seconds ]
Returns, or programs, the logging period in seconds.
MEMORY [ percent ]
Returns a reading of how much logging memory remains unused. The
response is “V 145 [
percentage of memory remaining ]”
OUTPUT (or OUT or O ) [ conc or scat ] [ temp (C) ] [ RH (%) ] [Pa
(mmHg)]
Returns the current values of the concentrations, temperature, RH and
atmospheric pressure if the pDR-1500 is running.
RHCORRECT [ status ]
Returns, or programs, the status of RH correction to the computation of
mass concentration.
Status = {“disable” or “off”, “enable” or “on”}