manualshive.com logo in svg

Thermo Scientific MIE ADR-1500, Instruction Manual

Share
Download
Thermo Scientific MIE ADR-1500 Instruction Manual Download Page 22

Introduction 

1-6

     MIE ADR-1500 Instruction Manual 

Thermo Fisher Scientific 

Selectable alarm levels with built-in audible signal and switched output, a 
USB communications port, and a programmable analog concentration 
output (voltage and current) are all part of this versatile instrument. 

A custom software package (pDR Port) is provided with the ADR-1500 to 
program operating/logging parameters (e.g., logging period, alarm level, 
concentration display averaging time, etc.) as well as to download stored or 
real-time data to a PC or laptop for tabular and/or graphic presentation. If 
required, the data can also be imported to standard spreadsheet packages 
(e.g., Microsoft Excel™, Lotus 1-2-3™, etc.). 

The ADR-1500 combines, easy to use menu-driven software, and advanced 
diagnostics to offer unsurpassed flexibility and reliability. The ADR-1500 
specifications follow. 

Summary of Contents for MIE ADR-1500



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands