Thermo Scientific KingFisher Flex User Manual Download Page 6 | Manualshive

Page: 6 / 94

background image

About This User Manual

Instrument safety and guidelines for use

6 Thermo Scientific KingFisher Flex User Manual

Thermo Fisher Scientific



Always follow basic safety precautions when using the
KingFisher Flex to reduce the risk of injury, biohazardous
contamination, fire, or electric shock.



Read this user manual in its entirety prior to operating the
instrument. Failure to read, understand, and follow the
instructions in the manual may result in damage to the
instrument, injury to laboratory and operating personnel or
poor instrument performance.



Observe all

“Warning”, “Caution”, and “Note” statements as

well as safety symbols and markings on the instrument and
in the documentation.



The device shall be operated only with software specifically
designed for the device.



Never open any other covers of the KingFisher Flex than
the transparent lid or the sliding door (Figure 2

–3) while the

instrument is plugged into a power source.



Never force a microplate onto the instrument.



The KingFisher Flex is intended for laboratory research use
only. Observe proper laboratory safety precautions, such
as wearing protective clothing and following approved
laboratory safety procedures.



Preventative maintenance instructions should be followed
closely to keep the instrument in the best condition for
maximum reliability. A poorly maintained instrument will not
give the best results.

Warning

This product contains very strong permanent

magnets. People wearing a pacemaker or metallic prostheses
should not use this product. A pacemaker or prostheses may
be affected or damaged if it comes in close contact with a
strong magnetic field.

s

Warning

If the device is not used according to manufacturer’s

instructions the protection provided by the device cannot be
guaranteed.

s

Instrument safety

and guidelines

for use

«
...
4
5
6
7
8
...
»

Summary of Contents for KingFisher Flex































































































Reviews:

No comments

Related manuals for KingFisher Flex

Brand: Raymarine Pages: 55

Brand: Halyard Pages: 4

Underwater Light Show & Fountain

Brand: GAME Pages: 2

Brand: Gardena Pages: 19

Brand: Jackco Pages: 6

Brand: Haaga Pages: 31

AquaPure Ei Series

Brand: Jandy Pages: 4

AquaPure Ei Series

Brand: Jandy Pages: 8

Jandy Pro Series

Brand: Jandy Pages: 16

Brand: lancer Pages: 3

Brand: lancer Pages: 12

Brand: R2 Pages: 26

Brand: UniPix Pages: 24

Brand: Yamaha Pages: 5

Brand: GE Pages: 176

Brand: Triton Blue Pages: 11

Brand: MAGSTIM Pages: 86

AirForm Night Splint

Brand: Össur Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands