Product Manual for IonPac CS16
Page 10 of 65
4.
Refer to the following figures for the precision cut tubing required for your configuration:
250 mm Separator Column
65 mm (2.56 in)
Precision Cut Tubing
(P/N 072188)
50 mm Guard Column
115 mm (4.53 in)
Precision Cut Tubing
(P/N 072189)
1
2
3
4
1
2
3
4
Figure 3
Tubing Connections for 250-mm Separator Column and 50-mm Guard Column
Separator Column
210 mm (4.5 in)
Precision Cut Tubing
(P/N 072187)
(use with any length
seperator column)
1
2
1
2
Figure 4
Tubing Connections for Separator Column Only
5.
Lift up the lid of the column cartridge to open it.
6.
Remove the fitting plug from the outlet fitting on the separator column. Orient the fitting with a flat side up (see
Figure 5) and push the fitting into the opening at the front of the column cartridge until it stops.
Figure 5
Column Outlet Fitting Installed in Column Cartridge
Document No. 031747-05
© 2010 Dionex Corporation
December 2010
