Thermo Scientific Heratherm OGS 100, Operating Instructions Manual

Page: 59 / 88

Handling and Control
Settings
Thermo Scientific Heratherm 7-11
v
Temperature Display Unit
The
Settings ->°C / °F
menu item allows for toggling the unit used for displaying
temperatures between degrees Centigrade and Fahrenheit.
Note
This setting does not have any impact on data logging via the RS-232 interface. Any
temperature data that is logged to a computer for operational parameter documentation purposes is
handed over in °C.
The word
USEr
appears in the display pane.
Press to confirm the selection.
In the settings dialog that appears, set the temperature
measured with the external reference sensor by using
or and confirm your settings with .
The newly entered value will be stored and used to
calibrate the internal temperature sensors with the
value measured by the reference sensor.
The display returns to its default mode.
The Settings icon in the menu bar will go out.
Table 7-11Entering the Calibration Reference Temperature Manually
Table 7-12Toggling the Temperature Display Unit
Press to activate the menu bar, then use or
to select the Settings icon and press to
confirm.
Press to switch to the C - F menu item.
The text C - F is flashing in the display pane.