Thermo Scientific HERACELL VIOS 160i User Manual Download Page 101

Page: 101 / 200

Handling and control

User configuration

Thermo Scientific

HERA

CELL VIOS

160i

250i

6-25

Setting the language of the display screen

The input dialog allows the language of the display screen to be set. Seven languages are available:

• German,
• English,
• Spanish,
• French,
• Italian,
• Chinese,
• Japanese.

Selecting the display language:

1. Press the

Menu

key.

2. Select the menu command Language.

• The input dialog shown in

Figure 6-28

is displayed.

Figure 6-28.

Language setting

3. To browse upward in the selection:

• Press the + key.

4. To browse downward in the selection:

• Press the - key.

5. The new language appears in the display. The

New

message indicates that the selection has been

changed, but not saved yet.

6. To accept and save the selection:

• Press the

Enter

key.

• The system returns to the

Settings/Setup

menu.

Summary of Contents for HERACELL VIOS 160i









































































































































































































Search results

Summary of Contents for HERACELL VIOS 160i

Reviews:

Brands by name

Popular brands

Thermo Scientific HERACELL VIOS 160i, User Manual

Search results

Summary of Contents for HERACELL VIOS 160i

Reviews:

Brands by name

Popular brands