Thermo Fisher Scientific
AutoPILOT PRO Flow Computer User Guide 9-1
Chapter 9
Front Panel Interface
You can interface with the instrument through the keypad and LCD on the
front panel or through the AutoCONFIG software. This chapter covers the
front panel interface. Instructions on using the AutoCONFIG software are
covered in the software help system, which is accessible through the
AutoCONFIG software by clicking the Knowledge Base icon.
The AutoPILOT PRO flow computer features a 4 x 4 keypad. The table
below describes how to use the keys to operate the instrument.
Figure 9–1.
Table 9–1.
Key
Description
Number keys (0–9)
Use to enter values.
Press 5 to view contrast setting. Use up and down arrows to adjust
the contrast.
Delete
Press to clear the displayed value.
Enter
Press to go to the next menu or to exit the display list and receive
the user ID / password prompt.
Period
Press to enter a decimal.
In some cases, you can press the period to toggle the displayed
item on and off.
May also be pressed to pause a scrolling display.
Using the Keypad
