Installing the Basic System
Mounting the Enclosure onto the Transducer
Thermo Fisher Scientific
AutoPILOT PRO Flow Computer User Guide 3-3
Figure 3–1. Direct mounting steps 1–3 (fiberglass enclosure shown)
4. Install the transducer mounting bracket onto the transducer, and install
the transducer grommet over the bracket.
Figure 3–2. Direct mounting step 4
5. Orient the transducer so that the “H” tag is facing the same direction as
the front of the flow computer enclosure. Open the enclosure door, and
insert the transducer into the bottom of the enclosure.
