xii
About this Manual
This manual contains the information necessary in order to guarantee a safety an
correct use of the
Ramsey Mercury Free Tilt Sensor
system (
Control Units
with
Probe).
Read this manual before working with the product. For personal and system safety
and for best product performance, make sure you thoroughly understand the contents
before using this product.
The manufacturer has a policy of constantly developing and upgrading its products
and hence may make changes without prior notice.
Who Should Use this Manual?
This manual is a learning resource and reference for specialised technical personnel
concerned with installing, operating or maintaining the probe and control.
Standards Applied and Technical Specifications
The system
has been made in compliance with the EC, standards.
The products are supplied complete with all the documentation required by these
standards. The installation, use and maintenance manual is an integral part of this
documentation and contains all the informations needed to ensure the efficent
operation of the system, with particular regard to personnel safety.
The following standards have been referred to the design of the
Ramsey Mercury
Free Tilt Sensor
system:
CAN/CSA-C22.2
Safety Requirements for electrical equipment for Measurement, Control,
No. 61010-1-04
and Laboratory: Use- Part 1 General Requirements
UL Std. No. 61010-1 Safety Requirements for electrical equipment for Measurement, Control,
and Laboratory: Use- Part 1 General Requirements
EC 93/68
Low Voltage Directive
EN 61010 : 2001
Safety Requirements for Electrical Equipment for Measurement
EN 61326-1 :2006
(EMC)
Summary of Contents for 20-35-NM-DIN
