Thermo Scientific 1300 Series, User Manual

Page: 17 / 130

1-10 1300 Series A2 Thermo Scientific
Section 1
Description
The optional, factory-
installed UV light is
installed at the top of the
front section of the sample
chamber.
The operating time of the
UV light is preset for 1
hour. The UV disinfection
procedure can be started by
pressing and holding the
“UV” key on the control
panel, with the window in
the closed position. If the
window is opened, the
procedure is immediately
cancelled.
Note To protect from UV radiation, the UV light can only be turned on
when the window is completely closed.
s
The single piece work tray is provided with the cabinet. It is placed onto
the frame above the sample chamber drain pan. It can be removed by
lifting up, using the large holes in the work tray.
The working area for optimal product protection extends over the entire
width and depth of the work tray. The two optional armrests are
positioned in the center of the working area 200 mm from each other. To
attach the armrests, insert into the first perforated track of the work tray.
Warning Work safety is assured only if the armrests are used correctly!
s
Work Area
UV Lights
UV light
Chamber light
Canopy
Figure 1-10. Lights
Width
Depth
Perforation
track
Armrest
Armrest
Separation
distance
Perforation
track
Work tray
Figure 1-11. Work tray