TK 55032-18-OP-EN
29
Figure 18.
Alarm Symbol
Should a P
P1
1E
E alarm occur, return air temperature read error alarm code —
will appear on display together with the alarm symbol, instead of the return
air temperature reading.
Figure 19.
P1E Alarm
Press and release the Select key to display the current alarm code. If there is
more than one active alarm, all the alarm codes on the unit can be viewed in
sequence by pressing and releasing the Select key.
Clearing Alarm Codes
The alarm condition in the unit must first be corrected. See important note
below. After resolving the alarm condition, press and release the Select key
to remove existing Alarm codes. The Standard Display will appear once the
Alarm codes have been cleared.
T
To
o C
Clle
ea
arr A
Alla
arrm
m C
Co
od
de
ess::
•
Correct the cause of the alarm code.
•
Press the Select key to remove the alarm code.
•
If more than one alarm code is present, press the Select key to clear each
alarm code individually.
IIm
mp
po
orrtta
an
ntt:: Continually clearing alarm codes without resolving the problem
will result in damage to the unit and compressor.
