Thermo King 919180, Manual

Page: 29 / 148

Unit Description
29
Products Acceptable for CYCLE-SENTRY
Operation
• Frozen foods (in adequately insulated
trucks)
• Boxed or processed meats
• Poultry
• Fish
• Dairy products
• Candy
• Chemicals
• Film
• All non-edible products.
NOTE: The above listings are not all inclusive.
Consult your grower or shipper if you have any
questions about the operating mode selection of
your type of load.
Selecting CYCLE-SENTRY or
Continuous Run Mode (Diesel or
Electric Operation)
1. With the display On, press and release the
S
ELECT
key until the [CYCLS] appears in the
upper display.
2. Press the
U
P
or
D
OWN
A
RROW
key until the
desired setting shows in the lower display.
• [YES] = CYCLE-SENTRY mode
• [no] = Continuous Run mode
3. When the correct setting shows in the lower
display, press the
E
NTER
key to load the new
setting in the controller memory.
• [Lod] (abbreviation for Load) will appear
in the lower display for a few seconds.
• If the
E
NTER
key is not pressed, the
operating mode will not change and the
display will return to the standard display
in about 10 seconds.
Initiating Manual Defrost
1. With the Standard Display on the display,
press the
D
EFROST
key.
NOTE: The coil temperature must be below
42 F (7 C) and the unit must be operating to
initiate a Defrost cycle.
• The Defrost icon will appear in the display
when the unit starts the Defrost cycle.
• Defrost will terminate automatically.