Thermo King 919180, Manual

Page: 124 / 148

Structural Maintenance
124
8. After the correct end play is obtained, add
grease for the bearings.
NOTE: Use ONLY Thermo King special
fanshaft grease (see Tool Catalog) in this
assembly.
Lock the assembly in a vise with the vent
facing up. Pour grease through the top plug
until it runs out of the side hole. The assembly
holds 2.2 oz. (65 ml). Check the condition of
the o-ring used on the plugs and replace if
necessary. Install top and side plugs. Clean up
any spillage.
9. Place the assembly on the workbench with the
vent up. Rotate the shaft by hand. The shaft
should be free enough to rotate without having
to hold the housing.
CAUTION: When installing the fanshaft
assembly, make sure that the vent is
mounted facing up.