Thermo King 098916, Maintenance Manual

Page: 51 / 196

Operating Instructions
50
Setpoint Menu
Pressing the
S
ETPOINT
key displays the following
list of tasks and values that can be activated or set:
• Opti-Set (AFAM+ only)
• Setpoint Temperature
• Water-Cooled Condenser
• Bulb Mode
• Evaporator Fan Speed
• Defrost Termination Temperature
• Economy Mode
• Humidity Control
• Humidity Setpoint
• AFAM (AFAM+ only)
• AFAM Delay (AFAM+ only)
• AFAM Rate (AFAM+ only)
• CO
2
Maximum (AFAM+ only)
NOTE: The screens that display on the
controller are determined by the controller
software setting and the options installed on the
unit. All screens are not present on all units.
A complete listing of the controller operating
menu is located on an 11” x 17” fold out on the
last page in this manual.
Figure 28: Setpoint Menu
Setpoint Menu
- Opti-Set
- Temp. Setp.
- Water-Cooled Condenser
- Bulb Mode
- Evap Fan Spd
- Defrost Trm.
- Economy Mode
- Hum. Control
- Hum. Setp.
- AFAM
- AFAM Delay
- AFAM Rate
- C02 Max.
NOTE: All screens are NOT
present on all units. The
screens that display on the
controller are determined by
the Controller Software
settings and the options
installed on the unit.