Thermo King 098916, Maintenance Manual

Page: 56 / 196

Operating Instructions
55
3. Repeat above step until all alarm codes have
been recorded. Press the
F3
key to scroll
backward to return to a previous alarm code.
4. To clear all alarm codes from the current
display list and turn off the Alarm LED, all
problems must be corrected and the alarm
code “acknowledged” in the Alarm List menu.
5. To acknowledge an alarm, press
F4
while
alarm code appears on screen. The alarm state
will change from Active or Not Active to
Acknowledge. If no key is pressed for 30
seconds, the controller returns to previous
menu level or LCD Standard Display
NOTE: See detailed Alarm Code list complete
with corrective actions in the Diagnosing and
Troubleshooting Section in the back of the
manual.