General instructions
To avoid errors and causing damage, especially personal injuries, be sure to read this manual
carefully before using the equipment, and follow all instructions.
When setting up and operating the unit, be sure to comply with the instructions contained in this
manual as well as all applicable laws, regulations and directives in your country (FRG: ZH 1/119,
ZH 1/342, ZH 1/343, ZH 1/598).
The unit meets the following safety requirements
DIN 12880 Part 1/11.78
DIN VDE 0700 Part 1 (IEC 335-1; EN 60335-1/11.90)
EN 61010
When you have an enquiry, order replacement parts or file a complaint, please state the data on
the nameplate and, if applicable, the fault code.
Equipment log book
We advise you to keep an equipment log book.
Keep a record of inspections and testing, calibration work and any major work carried out on the
unit - such as maintenance, agents loaded, etc. - in this log book (refer to APPENDIX).
Operating instructions
The operator (employer) is expected to provide anyone who works on or with the equipment with
written instructions, based on this instruction manual, for the tasks to be performed. These in-
structions should be easy to understand and in the language of the persons operating the equip-
ment.
This also applies to disinfecting and cleaning the unit (also refer to Chapter 10: Maintenance).
1. GENERAL
50 079 041
7/45
