Thermo Electron 3-Star Conductivity User Manual Download Page 34

Page: 34 / 111

Thermo Electron Corporation

IV-2

Orion Star Series Meter

• Press the UP & DOWN arrow to scroll through the Setup Menu until PH is

displayed on the Top line.

• Press the RIGHT ARROW key to select the pH setup option line (Middle Line).

Press the MEASURE key to return to measurement mode.

pH Setup Option Menu Screen.

Press the UP & DOWN arrow to select the pH setup Options as listed below:

rES = Resolution
bUF = Auto-Buffer Set

• Press the RIGHT ARROW key to select the option editing line (Bottom Line).

Press the MEASURE key to return to measurement mode.

pH Resolution Selection Menu Screen.

Press the UP & DOWN arrow to select the pH resolution options as listed below:

0.001, 0.01 or 0.1

• Press the RIGHT ARROW key to accept the selection and select the pH Setup

Menu line (Top Line). Press the MEASURE key to return to measurement mode.

• pH Auto-Buffer Set Selection Menu Screen.

Press the UP & DOWN arrow to select the pH resolution options as listed below:

USA = USA (USA/Orion Buffers) 1.68, 4.01, 7.01, 10.01, 12.46
EUrO = EUrO (Euro Buffers) 1.68, 4.01, 6.86, 9.15,

• Press the RIGHT ARROW key to accept the selection and select the pH Setup

Menu line (Top Line). Press the MEASURE key to return to measurement mode.

Summary of Contents for 3-Star Conductivity
















































































































Search results

Summary of Contents for 3-Star Conductivity

Reviews:

Brands by name

Popular brands

Thermo Electron 3-Star Conductivity, User Manual

Search results

Summary of Contents for 3-Star Conductivity

Reviews:

Brands by name

Popular brands