27
ENGLISH
INSTALLER
2
2
3
6
6
5
3
4
4
4
1
2
2
3
6
6
5
3
4
4
4
1
Open the door and use a hacksaw or file to remove the cutouts (top and bottom) on the opposite side of the head. Her-
metically close the door again by tightening bolts (2) until the door compresses the braided seal.
Remove the plug (1), taking care not to lose the spring from inside the threaded tube.
Fit the bracket on the opposite side, making sure that the pivot above the nut (6) engages the door bracket. If necessary,
screw down the nut (6) to raise the pivot. Finally, tighten the bolt (3).
System B - THE/TG 448÷850 3S
