THERMEx ER 200 V, User Manual

Page: 3 / 48

DEAR CLIENT!
Thank youfor your purchasing « THERMEX » electric water heater. We are confident that wide variety
of our electric water heaters will satisfy any your need. Application of modern processing and high-
grade materials define popularity and confidence to
« THERMEX» trade mark.
Electric water heaters «THERMEX» are designed and manufactured in strict compliance with
international standards that ensure reliability and safe operation.
The present manual covers «THERMEX» models ( ER 200 V , ER 300 V series). Model of your water
heater is indicated in section «Product Warranty » (subsection « Note About Sale » ) and on the
nameplate attached to the heater case.
We kindly ask you to carefully read this manual.
1. Intended use
Electric water heater (hereinafter « the Heater » ) is intended to supply hot water to domestic and
industrial facilities that have cold water pipeline at pressure at least 0,05 Mpa and no more than
0,6 Mpa.
The Heater should operate in heated indoor areas.
It is not intended to work in continuous-flow mode.
2. Specification
The main parameters of the Heater are given in Table 1 . It may be energized both from 1 and 3 phases
( Fig. 4 shows connection to mains 230V – 400V). Internal tank volume is indicated on the nameplate
attached to the Heater case. Inlet and outlet nipples are 3 /4 ʺ in diameter.
3. Delivery set
1. Electric water heater 1 pcs. ............................
2. Safety valve 1 pcs. ........................................
3. Operation manual 1 pcs. ...............................
Table 1
Model
ER 200 V
ER 300 V
Power
supply
voltage,
V
230/400
Rated
power,
kW
6,0
Volume,
L
200
300
Rated
pressure,
Mpa
0,6
Heating
time for
∆ 45°C,
min
115
170
Constant
daily
losses,
kW/h
2,18
3,13
The actual annual
energy consumption
(for permanent
loss of per diem), kW/h
795,7
1142,5
3
TX_IM_328_02
EN