Xsase VI LCS
VG4000 Series
This time, don't let Xaser VI slip away !
English
English
35
36
Install the Clip on Motherboard
B. Install by clips bundled in package
A
B
C
D
E
F
I
G
AMD AM2 Motherboard
Components for AMD AM2:
A-Metal H-type clip
B-Cushion
C-Insulator
D-50mm screws
E-Thumb nuts
F-White washers
G-Thermal compound
I -Stand offs
Remove the retention
module from the motherboard.
Remove the back plate on
back side of motherboard.
Tear off the tape on the back of
the insulator (C) and place it on
the metal H-type clip(A).
Note:
Placing the cushion onto the motherboard with the adhesive will prevent you from
removing the cushion in the future. If you are planning to remove the cushion for
future use, please don't remove the protective tape.
1.Insert the screws (D) through the Clip(ABC)
into the two holes on the Motherboard.
2.Put the washers (F) along the screws to
prevent the electric current.
3.Put the stand offs (I) along the screws to
fix the screws on the motherboard.
4.Apply a thin layer of thermal compound(G)
onto the processor.
5.Place waterblock on the processor through
the screws and fix it by thumb nuts(E).
Combine the insulator(C) and the cushion (B)
using the adhesive. Stick the metal H-type clip(A)
with the insulators (BC). Tear off the protective
layer to adhere it onto the motherboard.
Attach H-type clips(including ABC) on the back
side of motherboard.
Install Waterblock on Motherboard
Exploded View
Completed View
E
A
I
F
B
C
A
D
G
