Xsase VI LCS
VG4000 Series
This time, don't let Xaser VI slip away !
English
English
31
32
A. Install by back plate for motherboard
(Standard installation)
AMD K8
Motherboard
Components for
AMD K8:
G-Thermal compound
H-38mm screws
H
G
Remove the
retention frame
from motherboard.
1.Apply a thin layer of thermal
compound(G) onto the processor.
2.Place waterblock on the processor.
3.Secure the waterblock on the
motherboard by using screws(H).
Install the Clip on Motherboard
B. Install by clips bundled in package
A
B
C
D
E
F
I
G
AMD K8 Motherboard
Components for AMD K8:
A-Metal H-type clip
B-Cushion
C-Insulator
D-50mm screws
E-Thumb nuts
F-White washers
G-Thermal compound
I -Stand offs
Remove the retention
module from the motherboard.
Remove the back plate on
back side of motherboard.
Tear off the tape on the back of
the insulator (C) and place it on
the metal H-type clip(A).
Note:
Placing the cushion onto the motherboard with the adhesive will
prevent you from removing the cushion in the future. If you are
planning to remove the cushion for future use,
please don't remove the protective tape.
Check Your Back Plate!
A. If the back plate does have threaded
stand offs, please continue with
standard installation.(5-3-3 A)
B. If the back plate does NOT have threaded
stand offs, please continue with 5-3-3 B.
5.3.3 Secure Waterblock onto CPU (
AMD K8 Socket 754 / 939 / 940
)
Install the Clip on Motherboard
Install Waterblock on Motherboard
Exploded View
Completed View
G
H
