Thermaltake VG400LBNS Installation And Operation Manual Download Page 20

Page: 20 / 23

Xsase VI LCS

VG4000 Series

This time, don't let Xaser VI slip away !

English

5.6 Connect the Quickconn connector

Out

CPU Waterblock

3U bay liquid cooling system

5.7 Refill Coolant

Open the cover of liquid tank.

Turn on the PC power switch.

Please make sure liquid is

flowing continuously and

smoothly within the tube.

Close the cover of liquid tank.

Connect the

Quickconn connector.

Fill the tank up with coolant.

Liquid level will decrease when you power

on the system, please keep filling coolant

until the tank is filled up.

Important notice :

Please use the refill bottle included when

filling coolant in order to prevent the system

damage caused by coolant overflow.

Important notice :

The coolant should not be up to the high

water level to avoid the overflow problem.

Summary of Contents for VG400LBNS
























Search results

Summary of Contents for VG400LBNS

Reviews:

Related manuals for VG400LBNS

Brands by name

Popular brands

Thermaltake VG400LBNS, Installation And Operation Manual

Search results

Summary of Contents for VG400LBNS

Reviews:

Related manuals for VG400LBNS

Brands by name

Popular brands