Thermal Solutions AMP 1000, Installation, Operation And Maintenance Manual

Page: 2 / 88

2
Table of Contents
I. Hazard Definitions 4
II. Read Before Proceeding 5
A. Local Codes 5
B. Warranty 5
C. Shipment Damage 5
D. Connecting Gas Supply Line 5
E. Appliance Operation 5
F. Gas Leakage (If you detect or smell gas...) 5
G. Maintenance 5
H. Freeze Protection Fluids 5
I. Product Identification Label 5
J. Factory Test and Inspections 6
K. Disclaimers and Local Codes 6
III. Product Rating, Specifications, and Dimensional Data 7
IV. AMP Component Identification 10
V. Unpacking The AMP 14
A. Unpacking and Inspection 14
B. Installation and Operation Manual 14
VI. Pre-Installation and Mounting 15
A. General Installation 15
B. Appliance Mounting 16
C. Clearances 17
D. Clearances (French) 17
E. Closet and Alcove installation 17
VII. Venting 18
A. General Venting Guidelines 18
B. Venting Design Requirements 18
C. General Termination 19
D. Field Installation 20
E. Vent and Combustion Air Terminals 28
F. Terminal Installation 30
G. Polypropylene Venting 31
H. Optional Room Air for Combustion 33
I. Multiple Appliance Terminations 34
J. Removing Existing Appliance 35
K. Special Installation Requirements for Massachusetts 36
VIII. Condensate Disposal 37
A. General 37
B. Condensate trap installation 37
C. Condensate Neutralizer Installation 38
D. Common Condensate pump/Sump 38
IX. Hydronic Piping 39
A. AMP Boiler Piping 39
B. General Piping Guidelines 39
C. Factory Supplied Outlet Water Manifold 39