Theodor Friedrichs COMBILOG 1020, Hardware Manual

Page: 67 / 170

Hardware Manual COMBILOG 1020
67
6
DISPLAY / MENU OPERATION
6.1 Display and Operation
The datalogger
COMBILOG 1020 has a display with 2 lines of 16
characters each, in order to allow the indication of the measured
values of each channel. Furthermore the settings of the datalog-
ger can be recalled and changed if desired (therefore the input by
the press/ rotary knob must be unlocked; refer to the correspond-
ing section 6.2 “Menu Items“)
The operation is performed via the combined press/rotary knob at
the right side of the display. By turning the knob the menue items
or informations can sequentially be indicated. A confirmation or a
call of a function is performed by pressing the knob.
6.2 Menu Items
In the following diagrams all display pictures with the correspon-
ding operation steps are indicated. Following symbols are used
for the operation steps:
Symbols:
...... turn the knob clockwise
...... turn the knob counter clockwise
9
...... press the knob briefly (confirmation)
8
...... press the knob for approx. 1 second minimum
.............. (abortion)