Themis RES-XR4-3U, Installation Manual

Page: 122 / 184

3-34
Themis Computer
RES-XR4-3U Installation Manual Version 1.3
Select Enabled for all system event logging at bootup. The options are Enabled and
Disabled.
3.5.1.2 Erasing Settings
Erase SEL
Select 'Yes, On next reset' to erase all system event logs upon next system reboot.
Select 'Yes, On every reset' to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No ,
Yes, On next reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the sys-
tem event log is full. The options are
Do Nothing and Erase Immediately.
3.5.1.3 Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are
Enabled and Disabled.
3.5.2 BMC Network Configuration
LAN Channel 1: This feature allows the user to configure the settings for LAN
Channel 1.
3.5.2.1 Update IPMI LAN Configuration
This feature allows the BIOS to implement any IP/MAC address changes at the next
system boot. If the option is set to Yes, any changes made to the settings below will
take effect when the system is rebooted. The options are
No and Yes.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer.
Note: After making changes on a setting, be sure to reboot the system for the
changes to take effect.