Themis RES-XR4-3U, Installation Manual

Page: 110 / 184

RES-XR4-3U Installation Manual Version 1.3
3-22
Themis Computer
3.3.7.9 CPU1 Slot 1 PCI-E 3.0 x8 OPROM, CPU1 Slot 2 PCI-E 3.0 x8
OPROM, CPU1 Slot 3 PCI-E 3.0 x8 OPROM/, CPU2 Slot 4
PCI-E 3.0 x16 OPROM, CPU2 Slot 5 PCI-E 3.0 x8 OPROM,
CPU2 Slot 6 PCI-E 3.0 x8 OPROM, CPU2 Slot 7 PCI-E 3.0 x8
OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slots specified above. The options are Enabled and Disabled.
3.3.7.10 Onboard LAN Option ROM Select
This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and PXE.
3.3.7.11 Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option
ROM
Select Enabled to enable the onboard LAN1 Option ROM~LAN2 Option ROM.
This is to boot the computer using a network device. The default setting for LAN1
Option ROM is Enabled. The default setting for LAN2 Option ROM is Disabled.
3.3.7.12 LSI SAS 2208 OPROM
Select Enabled to use the LSI SAS Option ROM to boot the computer using a SAS
device. The options are
Enabled and Disabled.
3.3.7.13 VGA Priority
Use this feature to specify which graphics controller to be used as the primary boot
device. The options are
Onboard and Offboard (VGA).
3.3.7.14 Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled .
Note: Except on iF models, which only support SATA drives.