RES-32XEL Installation Guide
2-8
Themis Computer
2.1.4.1 Installation
1.
If there is a graphics card installed in the AGP Pro slot, remove it by unfas-
tening the Phillips screw securing it to the rear I/O panel (see
C
,
),
then carefully pulling the card from the AGP slot.
2.
Carefully insert the new graphics card into the AGP Pro slot, pressing firmly
downward for proper seating, and fasten it to the rear I/O panel using the Phil-
lips screw removed in Step 1.
2.1.5
PCI Cards
The RES-32XEL supports one 3.3V 64-bit/133-MHz and two 3.3V 64-bit/100-MHz
PCI-X card slots, as well as two 5V 32-bit/33-MHz PCI card slots. All slots support
full-size cards up to 8.5-inches long.
One of the 100-MHz PCI-X card slots (colored green; see
also supports an Ultra320-SCSI RAID card.
Figure 2-5.
AGP Graphics Card Installation
AGP Graphics Card Slot
B
C
A
