RES-32XEL Installation Guide
2-2
Themis Computer
1.
Loosen the two captive Phillips screws holding the protective top access cover
to the rear of the RES-32XEL chassis (see
A
,
2.
Both front and sides of the cover have flat hooks or tabs underneath that fit
under slots on the chassis top edges (see
B
). Remove the cover by
sliding it toward the rear until it is free of these chassis slots.
3.
Store the cover in a safe place until it is replaced.
Figure 2-1.
Remove the RES-32XEL Protective Access Cover
Loosen the 2 captive access-cover screws . . .
A
B
Rear View
. . . and slide the top cover toward the rear until the top hooks and tabs clear all chassis slots
Chassis slot
Chassis slot
Left-side top edge
