89
Select Target IQN from drop list which it will be the stacking device after connected.
The
Device Folder
will become the network share name and will be displayed
through network access such as SMB. You may input
Comment
to tell the subject
of this stack folder if needed.
For this associated stacking device, you may need to input a valid user name and
password to validate your access rights. If there is no user name and password
needed to access target volume, then leave it blank.
From the figure above, the
Device Folder
is “kendo02”. The figures below show
the result before and after via Microsoft Network Access when settings have been
completed.
Summary of Contents for N2810 Series
Page 1: ...OS7 User s Manual...