36
Start IP (IPv4)
Specifies the lower IP address of the DHCP range.
End IP in (IPv4)
Specifies the highest IP address of the DHCP range.
Default Gateway (IPv4)
Specifies gateway for the DHCP server service.
DNS Server 1,2,3 (IPv4)
Displayed the DNS server IP address.
Prefix (IPv6)
Specifies prefix
Prefix Length (IPv6)
Specifies prefix length
VLAN:
Each NIC is capable of VLAN support. To enable VLAN, simply click the check box
and input the VLAN ID (VLAN ID can be any digital number). The system with the
same VLAN ID will become a Virtual LAN group to allow more specific
communication among members.
Host Setting:
Other than setup each network port, there is global setting required.
Network Configuration (Global parameter)
Item
Description
Host name
Host name that identifies the Thecus IP storage on the network.
Domain name
Specifies the domain name of Thecus IP storage.
WINS Server
To set a server name for NetBIOS computer.
DNS Mode
Select the DNS server is coming from DHCP server or manual input.
A total of 3 DNS servers can be input. If the DNS setting is chosen
from DHCP server, then it will refer to WAN/LAN1 port.
DNS Server 1,2,3
Domain Name Service (DNS) server IP address.
Default Gateway
It can be chosen from a drop down list of default gateway that’s been used
for the Thecus IP storage.
IP Share Mode
When client PCs has connected to the LAN port with DHCP server function
enabled other than WAN/LAN1 and it will be able to access Internet through
WAN/LAN1 while WAN/LAN1 has direct connect to ADSL/Cable device.
WARNING
The IP address of associated NIC should not be in the range of the Start IP
address and End IP address (IPv4).
Summary of Contents for N2810 Series
Page 1: ...OS7 User s Manual...
