14
Chapter 3: First Time Setup
Overview
Once the hardware is installed, physically connected to your network, and powered
on, you can configure the Thecus IP storage so that it is accessible to your network
users. There are two ways to set up your Thecus IP storage: using the
Thecus
Setup Wizard
or the
LCD display (Depend on models)
. Follow the steps below
for initial software setup.
Thecus Setup Wizard
The handy Thecus Setup Wizard makes configuring Thecus IP storage a snap. To
configure the Thecus IP storage using the Setup Wizard, perform the following
steps:
1.
Insert the installation CD into your CD-ROM drive (the host PC must be
connected to the network).
2.
The Setup Wizard should launch automatically. If not, please browse your
CD-ROM drive and double click on
Setup.exe.
3.
The Setup Wizard will start and automatically detect all Thecus storage
devices on your network. If none are found, please check your connection
4.
Select the Thecus IP storage that you like to configure.
5.
Login with the administrator account and password. The default account
and password are both “
admin
”.
NOTE
For MAC OS X users, double click on Thecus Setup Wizard .dmg file.
Summary of Contents for N2810 Series
Page 1: ...OS7 User s Manual...
