Theatrelight Nova 24, Operation Manual, Page: 30 / 63

NOVA OPERATION 25
SCENE EDITING
You can edit the playback levels of any Scene using the Edit Up and Down keys. Editing must be done with the scene live on
stage, with Record enabled. Editing Scene channel levels immediately changes the level in memory.
EDITING SCENE LEVELS
The Edit Up and Down keys fade channel levels at a default 5 second rate to prevent obvious errors on stage. Channels which
have been edited are written directly into the Scene memory.
1 Set the Fade Master at Instant, and the Scene to be edited at Full. Set all other Scenemasters off.
2 Hold [UP], and press any Channel Flash keys: those channels will fade up.
3 Hold [DOWN] and press any Channel Flash keys: those channels will fade down.
When Up and Down are pressed with a Channel Flash key, the first ten Mimic LEDs display the level of that channel to the
nearest 10% while the level is fading up or down.
COPYING A SCENE LIVE
You can copy a Scene to any other fader on the same page by playing it back live, recording the output of the desk, and then
assigning the recording as follows:
1 Set the Scene to copy at Full. Add other Scenes or Channels at any level if required.
2 Press [RECORD] to record the levels.
3 Hold [RECORD], then press the Flash key above the new Scenemaster fader to assign the recording.
TRANSFERRING A SCENE TO ANOTHER PAGE
You can also copy a Scene to any other page as follows:
1 Set the Scene to copy at Full. Add other Scenes or Channels at any level if required.
2 Press [RECORD] to record the levels.
3 Press [PAGE] to move to another page.
4 Hold [RECORD], then press the Flash key above the new Scenemaster fader to assign the recording.
This will record the new levels under that Scenemaster on the new page. If it is the same master as the last page, you will need to
take the master to zero to release the last page playback. Bringing the master to full plays back the new scene on the new page.